HP Pavilion dv8000 Maintenance And Service Manual page 165

✎
If necessary, perform the following steps to remove the power
connector cable from the fan assembly.
✎
The power connector cable is included in the Cable Kit, spare
part number 403814-001.
6. Turn the fan assembly upside down with the power connector
toward you.
7. Remove the power connector cable 1 from the routing
channel on the fan assembly.
8. Remove the power connector 2 from the clip in the fan
assembly.
Removing the Power Connector Cable
Reverse the above procedure to install the power connector cable
and fan assembly.
Maintenance and Service Guide
Removal and Replacement Procedures
5–75