2. Disconnect the fan cable 1 and the power connector cable 2
from the system board.
3. Remove the following screws:
3 One Phillips PM2.5×4.0 screw that secures the expansion
4 Two slotted M1.5×9.0 screws on each side of the
5 Two Phillips PM2.5×7.0 screws on each side of the
Removing the Fan Assembly Screws
Maintenance and Service Guide
port bracket and fan assembly to the system board
expansion port 2 connector that secure the expansion port
bracket and fan assembly to the system board
external monitor connector that secure the fan assembly to
the system board
Removal and Replacement Procedures
5–73