Philips HD7854 User Manual page 17

The CALC CLEAN indicator lights up
continuously.
• The CALC CLEAN indicator goes on when
you need to descale the machine. This happens
after 1000 cups of SENSEO
250 cups of cappuccino, latte macchiato or
caffè latte have been brewed. To descale your
SENSEO machine, follow the instructions in
®
chapter 'Descaling'. The CALC CLEAN indicator
only goes out after the descaling procedure has
been performed correctly and the Calc-Clean
tool has been removed.
I pressed the CLEAN/CALC CLEAN button, but
the machine does not work.
• If you want to rinse the milk container unit,
make sure that you fill the milk container with
cold water and that you insert the milk
container unit properly into the machine.
• If you want to descale the machine, make sure
that the Calc-Clean tool is placed correctly. See
chapter 'Descaling' for more details.
• Perhaps the machine is still heating up (the light
ring around the on/off button flashes slowly).
The machine needs some time to heat up
before descaling is possible.
The descaling cycle lasted only 5 minutes.
• The descaling cycle was probably interrupted.
This can have several causes: 1) You pressed
the on/off button during the descaling cycle 2)
You removed the water reservoir during the
descaling cycle 3) You did not place the Calc-
Clean tool correctly or removed it from the
machine during the descaling cycle.
• To restart the descaling procedure: 1) Remove
the Calc-Clean tool 2) Flush the machine by
pressing the 1-cup button qand the 2-cup
button qq briefly at the same time 3) Reinsert
the Calc-Clean tool and press the CLEAN/
CALC CLEAN button to start the descaling
procedure.
black coffee or
®
The light ring around the on/off button
continues to flash rapidly.
• When the light ring around the on/off button
flashes, there is not enough water in the water
reservoir to brew coffee. To brew coffee, the
water in the water reservoir must be above
the MIN level.
• You may have selected a coffee variety with
milk (cappuccino, caffè latte or latte macchiato)
while the milk container unit is not placed in
the machine or is not placed in the machine
correctly. Place the milk container unit filled
with milk in the machine if you want to brew a
coffee variety with milk.
• The water reservoir has not been placed
properly. Remove the water reservoir and put it
back onto the machine in the correct position.
• You may be using the SENSEO
a room with a temperature below 10°C. The
SENSEO machine does not work below 10°C.
®
Check if the SENSEO
normally when you use it in a room with a
temperature above 10°C.
The SENSEO machine produces more sound
®
than usual.
• 1. When the machine froths milk for a coffee
variety with milk, it is perfectly normal that
it produces more sound than when it brews
SENSEO black coffee.
®
• 2. Perhaps the cover of the milk container lid
is not closed properly. Always close the cover
properly ('click') before you slide the milk
container unit back into the machine.
machine in
®
machine functions
®
17