Internet Parameters Configuration - TP-Link TL-WR543G Installation Manual

Internet Parameters Configuration

This page will then display.
Click Next
Choose the operation mode for the
TL-WR543G.
AP Client Router mode is for connecting
to the WISP (Wireless Internet Service
Provider);
AP Router is for connecting to the
common ISP using cable connection.
Click Next
Choose the Connection Type given by
your ISP.
If PPPoE is selected, please proceed to A;
If Dynamic IP is selected, please skip to B;
If Static IP is selected please skip to C.
Click Next
1. If you did not get the Connection Type information, please contact your
Note
ISP for this information.
2. If your ISP provides other connection types such as PPTP, L2TP or
BigPond (or Heart Beat Signal), you should go to "Network > WAN" to
configure your connection type referring to the User Guide on the
Resource CD provided.
C
4
2
2