Hardware Connection - Internet - TP-Link TL-PA4030 User Manual

2.6 Hardware Connection – Internet
This section describes how to connect the Powerline Adapter into your existing ADSL broadband
connection via ADSL Ethernet port. Follow the procedures described below to connect the
Powerline Adapter to your ADSL broadband connection:
1． Connect one end of the provided Ethernet (RJ45) cable to an Ethernet port of the Powerline
Adapter.
2． Connect the other end of the Ethernet (RJ45) cable to an available Ethernet port of your ADSL
broadband Router.
3． Plug the Powerline Adapter into a wall socket next to the computer.
4． Turn on your computer.
5． Check and confirm that the Power LED
the Powerline Adapter are ON.
The hardware connection mechanism is shown below:
TL-PA4030 AV500 3-port Mini Powerline Adapter
, Ethernet LED
7
, and Powerline LED on