Diagnostics Menu; System Configuration Menu - HP Compaq 6720t Maintenance And Service Manual

Diagnostics menu

Select
Memory Check

System Configuration menu

NOTE:
Some of the listed System Configuration options may not be supported by your computer.
Select
Language (or press f2)
Boot Options
Device Configurations
Built-In Device Options
Port Options
To do this
Run a comprehensive test on system memory.
To do this
Change the Computer Setup language.
Set an f9, f10, and f12
●
● Enable/disable CD-ROM boot.
Enable/disable floppy boot.
●
● Enable/disable internal network adapter boot and set the boot mode (PXE).
Enable/disable MultiBoot, which sets a boot order that can include most boot
●
devices in the system.
● Set the Express Boot Popup delay in seconds.
Set the boot order.
●
● Swap the functions of the
Enable/disable USB legacy support. When enabled, USB legacy support allows
●
the following:
Use of a USB keyboard in Computer Setup even when a Windows
◦
operating system is not running.
Startup from bootable USB devices, including a hard drive, diskette drive,
◦
or optical drive connected by a USB port to the computer.
Enable/disable embedded WLAN Device Radio.
●
● Network Interface Controller (LAN).
LAN/WAN switching.
●
● Enable/disable Wake on LAN.
Enable/disable the optical disc drive.
●
● Enable/disable the USB port.
Enable/disable the PC Card slot.
●
delay when starting up.
fn key and left ctrl key.
Computer Setup menus 63