Memory Module - HP Compaq 6720t Maintenance And Service Manual

Remove the flash drive (3) from the flash drive bay.
5.
If it is necessary to replace the flash drive bracket, slide the module out of the bracket.
6.
Reverse this procedure to reassemble and install the flash drive.

Memory module

Description
1024-MB (PC2-5300, 667-MHz, DDR2)
Before removing the memory module, follow these steps:
Shut down the computer. If you are unsure whether the computer is off, turn the computer on, and then
1.
shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC adapter from the computer.
Remove the battery (see
4.
Remove the memory module:
Loosen the Phillips PM2.0×6.0 captive screw (1) that secures the memory module compartment cover
1.
to the computer.
Battery on page 29).
Spare part number
414046-001
Component replacement procedures 31