HP 2510p Specifications page 32

QuickSpecs
Technical Specifications
Media Access Protocol CSMA/CA (Collision Avoidance) with ACK
Network Architecture
Models
Roaming
2
Output Power (for CKK)
Output Power (for OFDM;
power varies by data
2
rate)
Power Consumption
Power Management
3
Receiver Sensitivity
Antenna type
Range
Form Factor
Weight
Dimensions
Operating Voltage
Temperature
Humidity
Altitude
DA - 12717 Worldwide QuickSpecs — Version 14 — 9.26.2007
HP Compaq 2510p Notebook PC
Ad-hoc (Peer to Peer)
Infrastructure (Access Point Required)
IEEE 802.11 compliant roaming between access points
17 dBm
15 dBm
Idle associated: 300 mW
Idle unassociated: 150 mW
Transmit/Receive 20 MHz channel: 2.6 W (max)
Transmit/Receive 40 MHz channel: 3.3 W (max)
ACPI compliant power management
802.11 compliant power saving mode
270 Mbps: -66dBm, 162 Mbps: -72 dBm, 54 Mbps: -72 dBm, 11 Mbps:
-85 dBm , 1 Mbps: -94 dBm
High efficiency dual band antenna with spatial diversity, mounted in the
display enclosure
802.11 a – Typical
(@6 Mbps)
802.11 b – Typical
(@1 Mbps)
802.11 g – Typical
(@1 Mbps)
PCI-Express MiniCard
0.026 lb (12 g)
0.19 x 1.2 x 2.0 in (4.75 x 29.85 x 50.8 mm)
3.3v +/- 10%
Operating
Non-operating
Operating
Non-operating
Operating
Non-operating
600 feet – Outdoor Open Area
150 feet – Indoor, Office environment
1200 feet – Outdoor Open Area
300 feet – Indoor, Office environment
1200 feet – Outdoor Open Area
300 feet – Indoor, Office environment
14° to 149° F (–10° to 65° C)
–40° to 176° F (–40° to 80° C)
10% to 90% (non-condensing)
5% to 95% (non-condensing)
0 to 10,000 ft (3,048 m)
0 to 50,000 ft (15,240 m)
Page 32