Table of Contents
Advertisement
Problem
The appliance makes noises or pop-
ping sounds.
The flame colour is orange or yellow.
If you cannot find a solution to the problem yourself, con-
tact your dealer or the service centre.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
Installation
Warning! Refer to "Safety information" chapter.
Technical Data
Dimensions
Height
Width
Depth
Top oven capacity
Main oven capacity
Location of the appliance
You can fit your freestanding appliance with cabinets on
one or both sides and in the corner.
Do not install the appliance in a bed-sitting room of vol-
ume less than 20 m³ or in a bathroom, shower room or
garage.
Warning! Do not install the appliance below ground
level, for example in a basement, or aboard a boat,
yacht or other vessel.
Possible cause
The necessary data for the service centre is on the rating
plate. The rating plate is on the front frame of the oven
cavity.
For the minimal distances of fitting check the table.
900 mm
595 mm
600 mm
33 l
77 l
When the gas is drawn through the
burner, it can compress as they heat
up. Some metal parts of the appli-
ance expand and contract when they
heat up or cool down. The noises are
normal.
The flame can look orange or yellow
(flame disturbance) in some areas of
the burner because of how the burner
is made. This is normal.
.........................................
.........................................
.........................................
B
A
D
C
Remedy
A
E
F
C
19
Advertisement
Table of Contents
