Installation - AEG HK614010MB User Manual

7. INSTALLATION

WARNING!
Refer to the Safety chapters.
Before the installation
Before the installation of the appliance,
record the information below from the
rating plate. The rating plate is on the
bottom of the appliance casing.
• Model ...........................
• PNC .............................
• Serial number ....................
7.1 Built-in appliances
• Only use the built-in appliances after
you assemble the appliance into cor-
7.3 Assembly
min.
500mm
min.
50mm
rect built-in units and work surfaces
that align to the standards.
7.2 Connection cable
• Use the correct mains cable of type
H05BB-F Tmax 90°C (or higher) for a
single phase or two phase connection.
• Replace the damaged mains cable
with a special cable (type H05BB-F
Tmax 90°C or higher). Speak to your
local Service Centre.
R 5mm
+1
490 mm 560
min.
55mm
min.
20 mm
ENGLISH
9
mm
+1
min.
12 mm