Care And Cleaning; Troubleshooting - AEG HK614010MB User Manual

www.aeg.com
8

5. CARE AND CLEANING

Clean the appliance after each use.
Always use cookware with clean bottom.
Scratches or dark stains on the
glass-ceramic cause no effect on
how the appliance operates.
To remove the dirt:
1. – Remove immediately: melted
plastic, plastic foil, and food with
sugar. If not, the dirt can cause
damage to the appliance. Use a
special scraper for the glass . Put
the scraper on the glass surface at

6. TROUBLESHOOTING

You cannot activate or
operate the appliance.
The residual heat indica-
tor does not come on.
You cannot activate the
outer
If you tried the above solutions and can-
not repair the problem, speak to your
dealer or the customer service. Give the
data from the rating plate, three digit
letter code for the glass ceramic (it is in
the corner of the glass surface) and an
error message that comes on.
Problem
2.
3.
Possible cause
The appliance is not con-
nected to an electrical
supply or it is connected
incorrectly.
Problem with the house
electrical system.
The cooking zone is not
hot because it operated
only for a short time.
Make sure, you operated the appliance
correctly. If not the servicing by a cus-
tomer service technician or dealer will
not be free of charge, also during the
warranty period. The instructions about
the customer service and conditions of
guarantee are in the guarantee booklet.
an acute angle and move the
blade on the surface .
– Remove after the appliance is
sufficiently cool: limescale rings ,
water rings, fat stains, shiny metal-
lic discolorations. Use a special
cleaning agent for glass ceramic
or stainless steel.
Clean the appliance with a moist
cloth and some detergent.
At the end rub the appliance dry
with a clean cloth.
Remedy
Check if the appliance is
correctly connected to
the electrical supply (re-
fer to connection dia-
gram).
Examine the fuse in the
electrical system of the
house in the fuse box. If
the fuses blow again and
again, speak to qualified
electrician.
If the cooking zone oper-
ated sufficiently long to
be hot, speak to the
service center.
Activate the inner ring
first