The Heat Setting; Power Management; Automatic Heat Up; Count Down Timer - Electrolux EHL9530FOK User Manual

22 www.electrolux.com

3.3 The heat setting

Touch the control bar at the heat setting.
Change to the left or the right, if it is neces-
sary. Do not release before you have a cor-
rect heat setting. The display shows the
heat setting.

3.4 Automatic Heat Up

You can get a necessary heat setting in a
shorter time if you activate the Automatic
Heat Up function. This function sets the
highest heat setting for some time (see the
diagram), and then decreases to the nec-
essary heat setting.
To start the Automatic Heat Up function for
a cooking zone:
1.
Touch
play).
2. Immediately touch the necessary heat
setting. After 3 seconds
in the display.
To stop the function change the heat set-
ting.
12
11
10
9
8
7
6
5
4
3
2
1
0
1

3.5 Power function

The Power function makes more power
available to the induction cooking zones.
The Power function is activated for 10 mi-
nutes at most. After, that the induction
cooking zone automatically sets back to
highest heat setting. To activate, touch
( comes on in the dis-
2 3 4 5 6 7 8 9 10 11 12 13 14
comes on. To deactivate, touch a heat
setting

3.6 Power management

The power management divides the power
between two cooking zones in a pair (see
the illustration). The power function increa-
ses the power to the maximum level for
one cooking zone in the pair. The power in
the second cooking zone automatically de-
creases. The heat setting display for the re-
duced zone changes between two levels.
3.7 Timer

Count Down Timer

Use the Count Down Timer to set how long
comes on
the cooking zone operates for only this one
time.
Set the Count Down Timer after the se-
lection of the cooking zone.
You can set the heat setting before or after
you set the timer.
• To set the cooking zone: touch
again and again until the indicator of a
necessary cooking zone comes on.
• To activate the Count Down Timer:
touch
00
of the cooking zone start to flash slow,
the time counts down.
• To see the remaining time: set the
cooking zone with
the cooking zone starts to flash quickly.
The display shows the remaining time.
• To change the Count Down Timer:
set the cooking zone with
or
• To deactivate the timer: set the cook-
ing zone with
, maining time counts back to
indicator of the cooking zone goes out.
- .
of the timer to set the time (
99
- minutes). When the indicator
. The indicator of
.
. Touch
. Touch
. The re-
00
. The