F
Video and Audio
Connectors
G
TV Antenna Cable In
H
RS232C
I
AC in connector
Lower Video and Audio Connectors
Use these connectors to connect composite devices, S-video devices, component devices, audio
receivers, subwoofer out, TV video out, and audio out.
Upper Video and Audio Connectors
Use the green (Y2), blue (Cb2/Pb2), and red (Cr2/Pr2) inputs to connect the video cables from
devices that support High Definition signals such as a progressive scan DVD player, or a digital cable
or satellite set-top box. This connector supports 480i, 480p, 720p, and 1080i format video signals.
Use the audio inputs to connect the audio cables from the same component.
•
Connect composite video cable and left-right audio cables for one or two
devices such as a VCR, a DVD player, or a laser disc player.
•
Connect S-video cable and left-right audio cables for one or two devices
such as a VCR, a DVD player, or a laser disc player.
•
Connect cables for component video input.
•
Connect the audio cables for a PC.
•
Connect the audio cables for composite video and S-video.
•
Connect audio left-right cables for the YPbPr input and the YCbCr input.
Connect broadcasting (terrestrial) antenna or cable TV signal cable here.
This terminal is used for service only.
Connect the included power cord.
11
Introduction