Table of Contents
Advertisement
C. After the Appliance is Lit
Initial Break-in Procedure
When you light the appliance, you may notice that it pro-
duces heat which does have an associated odor or smell. If
you feel this odor is excessive it may require the initial three
to four hour continuous burn on high followed by a second
burn up to 12 hours to fully drive off any odor from paint and
lubricants used in the manufacturing process. Condensation
of the glass is normal
Note: This appliance should be run three to four hours
on the initial start-up. Turn it off and let it cool completely.
Remove and clean the glass. Replace the glass and run
the appliance for an additional 12 hours. This will help cure
the products used in the paint and logs.
WARNING
Fire Risk
High Temperatures
Keep combustible household items away
from appliance.
Do NOT obstruct combustion and ventilation
air.
•
Do NOT place combustible items on top
of or in front of appliance.
•
Keep furniture, draperies away from
appliance.
D. Frequently Asked Questions
Issue
Condensation on the glass
Blue fl ames
Odor from appliance
Film on the glass
Metallic noise
Is it normal to see the pilot
fl ame burn continually?
Heat & Glo LifeStyle Collection • Dakota 42-B/Dakota 42H-B • 4036-909 Rev D • 08/06
This is a result of gas combustion and temperature variations. As the appliance warms, this condensation will
disappear.
This is a result of normal operation and the fl ames will begin to yellow as the appliance is allowed to burn for 20 to
40 minutes.
When fi rst operated, this appliance may release an odor for the fi rst several hours. This is caused by the curing of
the paint and the burning off of any oils remaining from manufacturing.
This is a normal result of the curing process of the paint and logs. Glass should be cleaned within 3 to 4 hours of
initial burning to remove deposits left by oils from the manufacturing process. A non-abrasive cleaner such as gas
fi replace glass cleaner may be necessary. See your dealer.
Noise is caused by metal expanding and contracting as it heats up and cools down, similar to the sound produced
by a furnace or heating duct. This noise does not affect the operation or longevity of the fi replace.
In an Intellifi re ignition system it is normal to see the pilot fl ame, but it should turn off when ON/OFF is turned off.
In a standing pilot system the pilot will always stay on.
CAUTION
•
Prevent accidental appliance operation when not
attended.
•
Unplug or remove batteries from remote switch if
absent or if appliance will not be used for an extended
period of time.
•
P r o p e r t y d a m a g e p o s s i b l e f r o m e l e v a t e d
temperatures.
CAUTION
Smoke and odors are released during initial
operation.
Smoke and odors may be irritating to sensitive
individuals.
WARNING
Fire Risk
Keep combustible materials, gasoline and
other fl ammable vapors and liquids clear of
appliance.
•
Do NOT store fl ammable materials in the
vicinity of the appliance.
•
Do NOT use gasoline, lantern fuel,
kerosene, charcoal lighter fl uid or similar
liquids in this appliance.
Combustible materials may ignite.
Solutions
21
Advertisement
Table of Contents
