DB Drive SPA90.2 Instruction Manual
DB Drive SPA90.2 Instruction Manual

DB Drive SPA90.2 Instruction Manual

Speed series
Hide thumbs Also See for SPA90.2:

Advertisement

LIMITED WARRANTY

DB DRIVE warrants any products purchased in the U.S.A. from
an authorized DB DRIVE dealer. All products are warranted to be free
from defects in material and workmanship under normal use and
service for a period of (1) year when the unit is installed by an autho-
rized DB DRIVE dealer. Non-authorized dealer installed products carry
a one (1) year parts and labor limited warranty. This warranty applies to
the original purchase only.
DB DRIVE will either repair or replace (as its option) any unit
that has been found to be defective and under warranty provided the
defect occurs within:
One (1) year if purchased through an authorized DB DRIVE dealer.
This limited warranty does not extend to units that have been
subjected to misuse, abuse, neglect, or accident. Products that in DB
DRIVE's judgment shows evidence of having been altered, modified, or
serviced without DB DRIVE's authorization, will be ineligible under this
warranty.
To obtain warranty service please contact your retailer or see
our web site at wwwdbdrive.net for more details.
DB Research L.L.P.
302 Hanmore Industrial Parkway // Harlingen, TX 78550
ph: 877.787.0101 // fx: 956.421.4513 // www.dbdrive.net
®
SPA90.2
SPA90.4
SPA1000D SPA1300D
SPA1600D SPA1900D
AMPLIFIERS
Instruction Manual
• Instalation Instructions / Owners Manual •
Due to continuous improvement of the product the Specifications are subject to change without notice.
SPA150.4

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SPA90.2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for DB Drive SPA90.2

  • Page 1: Limited Warranty

    One (1) year if purchased through an authorized DB DRIVE dealer. SPA90.2 SPA90.4 SPA150.4 This limited warranty does not extend to units that have been SPA1000D SPA1300D subjected to misuse, abuse, neglect, or accident.
  • Page 2: Safety Precautions

    AFETY PRECAUTIONS NTRODUCTION Congratulations on your purchase of a DB Drive state-of-the-art power amplifier. Your use amplifiers power wire at the battery selection of a DB Drive car audio product indicates a true appreciation of fine musical reproduction. Whether adding to an existing system or including your DB Drive amplifier in Be sure to fuse the power wire within 12”...
  • Page 3: Features And Benefits

    SPA150.4 -2 Ohm Stereo, 4 Ohm Bridged a variable frequency selection for precise low pass filtering for the SPA1000D, SPA1300D , SPA1600D and SPA1900D. The SPA90.2 , SPA90.4 and SPA150.4 also offer the same frequency selection with the option of low or high pass filtering.
  • Page 4: Mounting Location

    OUNTING LOCATION OWER CONNECTIONS (SPA90.2 , SPA90.4 , SPA150.4 , SPA1000D , SPA1300D , SPA1600D , SPA1900D ) Before you start the installation, it will be necessary to find a mounting location for the ampli- fier. Find a location in which the amplifier will receive adequate ventilation in order to dissipate the heat it develops during operation.
  • Page 5: Signal Connections

    60Hz 400Hz 0dB 18dB 4 Ohm Speaker spa90.2 (1Ohm minimum) classAB 2 channel amplifier Optional full range line out connection SIGNAL CONNECTION: to addition addition in the system. 94.7 2 CHANNEL AMPLIFIERS power...
  • Page 6 PEAKER CONNECTIONS (SPA90.2 , SPA90.4 , SPA150.4) Make the speaker connections using speaker wire that is at least 16 power fuses +12v ch4- ch4+ ch3- ch3+ ch2- ch2+ ch1- ch1+ gauge or heavier. As with any audio component, proper phasing of the amplifier and speakers is essential...
  • Page 7: Adjustments And Settings

    DJUSTMENTS AND SETTINGS INE TUNE THE SYSTEM The “Speed Series” amplifiers are equipped with built-in variable crossover networks allow- Fine tune the amplifier’s input sensitivity ing you to select the crossover mode (i.e. Low-Pass/Full/High-Pass or On/Off) and the desired crossover point. For example if you wish to drive a pair of subwoofers, you can The gain sensitivity control for the “Speed Series”...
  • Page 8: Troubleshooting The System

    We have put together this trouble-shooting guide if you experience problems after installing the amplifier. Please keep in mind that the majority of problems incurred are SPA90.4 SPA90.2 Input Voltage @ 11 - 14.4 VDC: caused by improper installation and not the equipment itself. In addition, there are many...

This manual is also suitable for:

Spa90.4Spa150.4Spa1000dSpa1300dSpa1600dSpa1900d ... Show all

Table of Contents