Using The Smart Jump Shot Mode - Samsung NX30 User Manual

Shooting modes
My Camera >

Using the Smart Jump Shot mode

In Smart Jump Shot mode, you can set an area to capture a jumping
subject. The camera will automatically capture a photo when movement is
detected.
1 Rotate the mode dial to s, and then select Smart Jump
Shot.
2
Drag the box on the screen to the desired location.
3
Drag the corners of the box to adjust its size to fit the jumping
subject (one person).
4
Press [Shutter] or [o] to capture the photo.
•
The AF-assist light/Timer lamp will blink for 5 seconds. Informs the
subject to get ready to jump while the lamp is blinking.
•
When a subject is detected within the box on the screen after the
AF-assist light/Timer lamp stops blinking, the camera will capture 5
photos consecutively.
5
Touch the best image from the 5 photos to select it.
6
Press [o] to save the photo.
•
Press [m] to return to Shooting mode without saving the
photo.
•
Use a tripod to prevent your camera from shaking.
•
In dark environments the camera cannot capture photos.
71