Table of Contents
Advertisement
5
Select a video store, and follow the
onscreen instructions to rent and watch a
video.
» The video is downloaded to the USB
storage device. You can watch it now
or at any time within the rental period.
» For the downloaded video on the USB
storage device, you can watch it only
on this player.
6
Use the remote control to play and
control the video.
Stream multimedia via
Miracast
Through this player, you can stream audio and
video from a Miracast certified device to your
TV.
Before you start
•
Enable Miracast on the Miracast certified
source device, such as a smartphone, a
tablet (refer to a related user manual for
details.)
1
Press .
2
Select [Setup] > [Network] > [Miracast
break-in] > [On].
» Miracast is enabled on this player.
3
On the Miracast source device, initiate
the search for this player and select this
player when it is found (refer to the source
device's user manual for details).
• If this is the first time these 2 devices
are paired, an acknowledgement
message is displayed on your TV.
Accept it to continue the pairing.
• To cancel the pairing, press
remote control.
4
Wait until the media content from the
source device is displayed on your TV, then
choose the media to start play.
» Audio or video is streamed to your TV
through this player.
•
•
•
Stream media from an
Android device
With Philips SimplyShare, through this player
you can stream media files from an Android
based device on your TV. For details, visit
www.philips.com/support
Use Philips EasyLink
This player supports Philips EasyLink which
uses the HDMI CEC (Consumer Electronics
Control) protocol. You can use a single remote
control to control EasyLink compliant devices
that are connected through HDMI. Philips does
not guarantee 100% interoperability with all
HDMI CEC devices.
1
on the
2
3
• If the connection fails or the
media content does not show
up automatically, select [Setup] >
[Network] > [Miracast role] >
[Group Owner], and repeat the steps
above.
Note
This player can memorize up to 10 Miracast source
devices for pair-up.
This player can only connect a single Miracast certified
device at a time.
During connection via Miracast, Wi-Fi connection is
temporarily suspended.
Connect the HDMI CEC compliant devices
through HDMI, and turn on the HDMI
CEC operations on the TV and other
connected devices (see the user manual of
the TV or other devices for details).
Press .
Select [Setup]> [EasyLink].
EN
9
Advertisement
Table of Contents
