Samsung WB1100F User Manual page 126

Camera maintenance
•
If you reconnect the power cable when the battery is fully charged, the status
lamp turns on for approximately 30 minutes.
•
Using the flash or recording videos depletes the battery quickly. Charge the
battery until the red status lamp turns off.
•
If the indicator light does not illuminate, reconnect the cable, or remove the
battery and insert it again.
•
Overcharging batteries may shorten battery life. After charging is finished,
disconnect the cable from your camera.
•
Do not bend or place heavy objects on the AC cable. Doing so may damage the
cable.
Notes about charging with a computer connected
•
Use only the provided USB cable.
•
The battery may not charge when:
-
you use a USB hub
-
other USB devices are connected to your computer
-
you connect the cable to the port on the front side of your computer
-
the USB port of your computer does not support the power output standard
(5 V, 500 mA)
Handling and disposing of batteries and chargers with care
•
Never dispose of batteries in a fire. Follow all local regulations when you dispose
of used batteries.
•
Never place batteries or cameras on or in heating devices, such as microwave
ovens, stoves, or radiators. Batteries may explode when they are overheated.
125
Appendixes