Lenovo ThinkPad Edge E145 Hardware Maintenance Manual page 84

• "1020 Bottom cover" on page 58
• "1050 Hard disk drive" on page 61
• "1060 Wireless LAN card" on page 63
• "1070 Keyboard" on page 64
• "1080 Keyboard bezel" on page 66
• "1130 System board assembly" on page 72
• "1150 LCD unit" on page 75
• "1160 DC-in connector " on page 77
Illustration of the base cover assembly
Applying labels
The new base cover FRU is shipped with a kit containing labels of several kinds. Apply those labels when
you replace the base cover. For the labels that are not shipped with the new base cover, peel them off from
the old base cover, and adhere them to the new one.
The following illustration shows the correct location of each label.
6
5
If the Windows Certificate of Authentication (COA) label
old part with the label attached to the customer, or provide a letter to the customer stating what the label
was originally on the computer and what the label part number, serial number, and product key were.
When you replace the base cover, apply the FCC label
78
Hardware Maintenance Manual
10
7 8 9
11
5 is attached to a part that is replaced, return the
9 and the serial number label
1
2
3
4
10 .