Remote Controller - Danby DAC080EB2GDB Owners Manual And Care Manual

Operating Instructions
REMOTE
CONTROLLER
BUTTONS
ON/OFF button
Operation starts when
this button is pressed
and stops when the
button is pressed again.
NOTE:The unit will automa-
tically launch the Energy
Saver function when it is in
Cool, Dry, and Auto modes
(Auto-Cool and Auto-Fan
modes).
TEMP UP button
Push this button to
increase the tempera-
ture setting in 1°C
increments to 30°C.
FAN button
Used to select the fan
speed in four steps:
LOW MED HIGH AUTO
ENERGY SAVER
button
Press this button to
activate the Energy sav-
ing mode. Press it again
to stop the function.
This function is available in
Cool, Dry, and Auto modes
(only Auto-Cool and Auto-
Fan modes).
Model:
R15B
9
MODE button
Each time you press
this button, a mode is
selected in a sequence
that consists of Auto,
Cool, Dry, Fan, and
back to Auto.
TEMP DOWN button
Push this button to
decrease the indoor
temperature setting in
1°C increments to 17°C.
TIMER button
Push this button to
activate the "Auto
Start" or "Auto Stop"
program from 0-24
hours (0.5/1 hour increments)
SLEEP button
Press this button to
activate the Sleep
mode. This function is
available in Cool, and
Auto modes only, and
maintains the most
comfortable temperature
for you.