Operating the Monitor
Power-On Status Display
Displays the operating status of the monitor each time the
monitor is powered on. Select the location to which to display
The factory default is Top or Off, depending on the model.
Allows the computer to control some OSD menu features such
as brightness, contrast, and color temperature. Set to:
The factory default is On.
Bezel Power LED
Turns the light (LED) in the power button On and Off. When set
to Off, the light will remain off at all times.
(select models only)
Provides the timer-adjustment menu options:
Set Current Time — Sets the current time in hours and minutes.
Set Sleep Time — Sets the time you want to place the monitor
in sleep mode.
Set on Time — Sets the time you want the monitor to wake up
from sleep mode.
Timer — Sets the Sleep Timer feature On or Off; the default
setting is Off.
Sleep Now — Immediately sets the monitor to enter
Default Video Input
Selects the default video input signal when the monitor is
connected to two active and valid video sources. The default is
DVI. You must restart the computer to have the change take
Selects and displays important information about the monitor.
Provides the current input video mode.
Provides the recommended resolution mode and refresh rate
for the monitor.
Reports the serial number of the monitor. The serial number is
needed if contacting HP technical support.
Reports the firmware version of the monitor.
Reports the total hours of backlight operation.
For service support, go to: http://www.hp.com/support
Returns settings to factory defaults.