D-Link AirPlus DI-614+ Quick Installation Manual page 7

If your ISP requires a
Address, and this option is
selected, then this screen will
appear:
Enter the IP address
information originally
provided to you by your ISP.
You will need to complete all
the required fields.
Click Next
If your ISP uses
Point Protocol over Ethernet), and
this option is selected, then this
screen will appear:
Please be sure
to remove any
existing PPPoE client
software installed on
your computers.
Enter in the username
and password provided
to you by your ISP.
Click Next
Static IP
PPPoE (Point-to-
Do not use
the numbers
displayed in these
fields. They are only
shown as an example.