Denon AVP-A1HD Owner's Manual page 21

ENTER ui
u
ENTER
i
(Main remote control unit) (Sub remote control unit)
Finish
Auto Setup is complete.
1
Unplug the setup microphone from the unit's SETUP
MIC jack.
2
Set Audyssey Dynamic Volume ® .
AUTO SETUP
Finish
Storing complete.
Auto Setup is now finished.
Please unplug microphone.
Turn on Dynamic Volume ?
Yes
No
Turn Dynamic Volume off and exit Auto Setup
b This feature adjusts the output volume to the optimal level while
constantly monitoring the level of the audio input to the unit.
Optimal volume control is performed automatically without any
loss in the dynamism and clarity of the sound when, for example,
the volume suddenly increases for commercials shown during
television programs.
n When turning Dynamic Volume ® on
u
Use to select "Yes" , and then press
The unit automatically enters "Evening" mode.
n When turning Dynamic Volume ® off
u
i
Use to select "No" , and then press
ENTER
NOTE
i • After performing Auto Setup, do not change the speaker connections
or subwoofer volume. In event of a change, perform Auto Setup
again.
• After performing Auto Setup with two or three subwoofers, do not
change the channel distances and levels of any of the subwoofers.
1 2 3 4 5 6
Exit
ENTER
.
ENTER
.
0