6 Setting up
channels
This chapter explains how to reconfigure and
fine-tune channels.
Setting up channels
automatically
Automatically finds and saves channels.
1
Press ADJUST.
2
Press
[Channel Scan].
3
Press OK.
» The TV will automatically start searching
for channels.
Updating channels
1
Press ADJUST.
2
Press
[Update Scan].
3
Press OK.
» The TV will start to update the channels.
Setting channels manually
You can manually find and save analog TV channels.
Finding and saving new TV channels
1
Press ADJUST.
2
Press
[Search for Analog Channels] .
» The [Search for Analog Channels] menu
is displayed.
EN
16
Select [TV] > [Channels] >
Select [TV] > [Channels] >
Select [TV] > [Channels] >
3
Select [Start frequency (MHz) / End
Frequency (MHz)] and use the number
keys to enter the three-digit channel
frequencies.
4
Select [Start Search] and press OK.
5
(Home) Exit.
Press
Skipping channels
1
Press ADJUST.
2
Press
> [Channel Edit].
» The [Channel Edit] menu will be
displayed.
3
Press
Selectthe channel you wish to
skip and press OK. Select [Skip], then press
to make the change.
4
If you wish to confirm, please select [Save]
and press OK.
5
You can skip more channels by repeating
the steps above. Press OK to start finding
channels.
Tip
•
Use the number buttons on the remote control to access
channels that were skipped.
•
If you want to watch the channel, please repeat steps
1 to 4, thenpress OK Cancel them.
Swapping channels
1
ADJUST.
Press
2
Press
> [Channel Edit].
» The [Channel Edit] menu will be
displayed.
3
Press
Selectthe channel you wish to
swap, then press the red button.
4
Press
Selectthe channel you wish to
swap, then press the red button to confirm.
Select [TV] > [Channels]
Select [TV] > [Channels]