Advertisement
FloWise
™
SHOWERHEAD
HOW TO INSTALL SHOWER HEAD
TO SHOWER ARM
Thank you for selecting American-Standard...the benchmark of fine
quality for over 100 years.
To ensure that your installation proceeds smoothly--please read
these instructions carefully before you begin.
RECOMMENDED TOOLS
1
REMOVE SHOWER HEAD FROM HOUSING
Hold SHOWERHEAD (1) with one hand and HOUSING (2)
with the other as illustrated.
Rotate SHOWERHEAD (1) clockwise while holding HOUSING (2)
stationary. NOTE: The thread connection is a left hand
thread. Keep turning SHOWERHEAD (1) until it can be
removed from the HOUSING (2).
2
INSTALL HOUSING
Slide HOUSING (2) onto SHOWER ARM (3).
4
INSTALL HOUSING TO SHOWER HEAD
Install HOUSING (2) onto SHOWER HEAD (1). Thread
HOUSING (2) counter-clockwise to install onto SHOWER
HEAD (1). Hand tighten only.
Adjustable Wrench
3
2
Installation
Instructions
1660.715
3
INSTALL SHOWER HEAD
Rap SHOWER ARM (3) threads with Teflon tape.
Tighten SHOWERHEAD (1) with an adjustable wrench.
Do not over tighten.
TEFLON TAPE
1
1
Certified to comply with ANSI A112.18.1
2
1
3
2
M 9 6 8 9 7 6
Advertisement
Table of Contents
Need help?
Do you have a question about the FloWise Showerhead 1660.715 and is the answer not in the manual?
Questions and answers