Voice Recording/Playback - Creative BLASTERAXX AXX 200 Handy Manual

DID YOU KNOW?
Recording your voice or singing is made easy with AXX 200
If you need to make a voice recording or
even a song demo on-the-fly, the AXX 200
is all you need! The AXX 200 comes with 4
high-quality microphones that deliver an all
round 360° voice pick-up, making it ideal
for accurate voice recording. Just insert a
microSD card, and you're ready to go.
Audio recording is saved in WAV
format in the VOICE folder.
For recording, a Class 4 microSD/
l
microSDHC card is recommended.
It is a good practice to use a new
l
microSD card for recording.
The default recording sampling
l
rate is at 16 kHz. This is designed
to record longer voice recording
sessions (e.g. meetings) and avoid
large file sizes. You can switch to
48 kHz, which is ideal for shorter,
higher quality Karaoke music
recording (see User's Guide, pg 40).
Simultaneous audio playback and
l
recording on a microSD card is not
supported.
Playback of recordings always start
l
with the latest recording, followed by
the first recording and then the next
in sequential order.

Voice Recording/Playback

Here's how you do it!
1
Insert a microSD card.
2
Make sure the microphones
are turned on.
3
Press REC .
Start recording after you
hear a "beep".
The pulsing Mic Mute
button indicates that
recording is ongoing.
Stop recording:
Press REC again. A low pitched
"toot" is heard. The Mic Mute
button continues to pulse until the
recording is completely saved.
Playback recording:
Press REC to
playback recorded audio
in the VOICE folder. The Mic Mute
button blinks rapidly.
Skip recording:
Press or
8
during playback.