Table of Contents
Advertisement
DID YOU KNOW?
The dual-purpose battery powers your AXX 200 and also charges
your external device!
In On mode, the three white
LEDs light up according
to the battery level of your
AXX 200.
Here's how you do it!
In Standby mode, only
the middle LED lights up.
To check the battery level,
press POWER once.
While charging, the AXX 200 does not go into
l
Standby mode.
For optimal charging, it is recommended to
l
keep the volume low while the AXX 200 is
being charged, or when charging an external
device (e.g.: phone, MP3 player, etc.).
When turned on, some external devices
l
require a higher charging rate than battery
banks can typically provide. For the quickest
charging time, turn off your external device
before charging it.
Lithium ion battery life may suffer when it is
l
constantly fully depleted or overexerted at
low voltage. It is a good practice to keep the
battery well charged.
When the battery is low while playing at loud
l
volumes, the amplifier will intelligently and
automatically adjust the volume to a lower
and appropriate level so as to extend the
battery life.
10
Dual-Purpose Battery
Advertisement
Table of Contents
