Philips BDL6524ET User Manual page 30

This item is functional for Video mode input only.
NOTE:
Scan conversion
Choose to enable or disable the IP (Interlace to Progressive) conversion
function.
• {Progressive} – Enable the IP conversion function (recommended).
Once enabled, the interlace input signal will be converted to
progressive format for better display quality.
• {Interlace} – Disable the IP function. This mode is suitable for
displaying motion pictures, but it increases the chance of image
retention.
Film mode
Choose to turn on or off the film mode frame conversion function.
• {Auto} – Enable the film mode frame conversion function for
movies and motion pictures. The display converts a 24 frames-per-
second (24 fps) input signal format to DVD video signal format.
Once this function is enabled, it is recommended that you set the
{Scan conversion} function to {Progressive}.
• {Off} – Disable the film mode frame conversion function. This mode
is suitable for TV broadcasting and VCR signals.
IR control
Select the operation mode of the remote control when multiple
displays are connected via an RS232C connection.
• {Normal} – All displays can be operated normally by the remote
control unit.
• {Primary} – Designate this display as the primary display for remote
control operation. Only this display can be operated by the remote
control.
• {Secondary} – Designate this display as the secondary display. This
display can not be operated by the remote control, and will only
receive the control signal from the primary display via the RS232C
connection.
{Lock All} / {Lock all but Volume} / {Lock all but Power} – Lock
•
the remote control function of this display. To unlock, press and hold
the [DISPLAY] button on the remote control for 5 (five) seconds.
Keyboard control
Choose to enable or disable the display keyboard (control buttons)
function.
• {Unlock} – Enable the keyboard function.
• {Lock All} / {Lock all but Volume} / {Lock all but Power} – Disable
the keyboard function.
Tiling
With this function you can create a single large-screen matrix (video
wall) that consists of up to 150 sets of this display (up to 15-sets on the
vertical and 10-sets on the horizontal sides). This function requires a
daisy-chain connection.
Tiling
H monitors
V monitors
Position
Frame comp.
Enable
Switch on delay
Heat status
This function allows you to check the thermal status of the display at
any time.
1
1
1
No
No
Off
Date and time
Adjust the current date and time for the display's internal clock.
Date and time
Year
Month
Day
Hour
Minute
Daylight saving time
Current date time
1. Press [ ] button to enter the submenu.
2. Press [ ] or [ ] button to toggle among {Year}, {Month}, {Day},
{Hour}, {Minute}, and {Daylight saving time}.
3. Press [ ] or [ ] button to adjust all settings except {Daylight
saving time}.
4. Press [SET] button to enter the {Daylight saving time} submenu.
5. Press [ ] or [ ] button to select item, press [
to adjust.
Schedule
This function allows you to program up to 7 (seven) different scheduled
time intervals for the display to activate.
You can select:
• The time for the display to turn on and turn off.
• The days in a week for the display to activate.
• Which input source the display will use for each scheduled
activation period.
NOTE: We recommend you to set up current date and time in the
{Date and time} menu before using this function.
1. Press [SET] or [ ] button to enter the submenu.
Schedule
Today 2013 . 01 . 01
1
2 On
3 ＿ : ＿
4
5 Every day
6 Wed
7 SAT
21
BDL6524ET
2013
01
01
20
20
2013 . 01 . 01 20 : 20 : 17
Press [SET] to set clock
] or [
TUE 20 : 19 : 55
Off Input
＿ : ＿ ＿
MON TUE
THU FRI
SUN Every week
] button