HP L1940T User Manual page 30

Operating the Monitor
To use the auto-adjustment feature:
1. Allow the monitor to warm up for 20 minutes before
adjusting.
2. Press the Auto Adjust button on the monitor front panel.
❏
You can also press the Menu button, then select Image
Control from the OSD Main Menu. Next, select Auto
Adjustment. Refer to "Adjusting Monitor Settings" in
this chapter.
❏
If the result is not satisfactory, continue with the
procedure.
3. Insert the CD in your disc drive. The CD menu launches.
4. Select Open Auto-Adjustment Software. The setup test
pattern displays.
5. Press the Auto Adjust button on the monitor front panel to
produce a stable, centered image.
6. Press the ESC key or any other key on your keyboard to exit
the test pattern.
4–4 User Guide