Adjusting The Image Size - HP L1810 User Manual

The following table describes the time control options available:
Menu Item
Current Time
Standby Time
On Time
Timer ON/OFF
When the monitor is in power off mode the front panel indicator
NOTE
flashes amber. To reactivate your monitor when in power off mode,
press the on/off button.
Every time your monitor is unplugged you will need to reset your
monitor's timer.

Adjusting the Image Size

If the display properties in your computer are set to a resolution
lower than 1280 1024, your monitor will be of lower quality when in
full-screen mode. This is due to the approximations made in the
scaling process. To display the image at the optimum quality:
Use to
Set the current local
time
Set the time at which
you wish your LCD to
switch OFF
Set the time at which
you wish your LCD to
switch ON
Switch the timer ON or
OFF
Select EXIT, then press
Select from the on-screen main menu and press
the IMAGE SIZE submenu.
HP 18.1 LCD" Color Monitor User's Guide
Action
1. Select the hour setting using the
control, then press
selection.
2. Select the correct hour, then press
to confirm your selection.
3. To select the minute setting repeat steps 1
and 2.
4. When the correct time is set, select EXIT,
then press
submenu.
1. Select ON or OFF using the
2. Press to make your selection and
return to the TIMER submenu.
to return to the main menu.
USING Your Monitor
to confirm your
to return to the TIMER
control.
to enter
English 15