Download Print this page

KeySonic KSK-3200 RF Operation Manual page 12

Wireless 2.4ghz

Advertisement

Available languages

Available languages

2. Installation
2.1 System Requirements
This keyboard requires a PC with USB connection and one of the following operating systems:
For the installation of the keyboard under the mentioned above operating systems you need NO special
driver!
2.2 Installation of the USB receiver
In order to install your keyboard, please perform the following steps:
• Connect the included USB receiver (dongle receiver) to a free USB port on
your computer.
Advise:
Please ensure, that the USB receiver has a minimal distance of 20 cm to
metallic dividing walls, other computer cases, monitors, ZIP drives,
loudspeakers and switching power supplies.
• All mentioned above state-of-the-art operating systems with Plug & Play support will recognize your
keyboard automatically and load the required drivers. During the phase of installation your operating
system informs you via changing Pop-up information windows on the task-bar about the current status of
installation. Please be patient, until the system informs you finally about the successful installation. The
USB receiver is now ready for operation.
• Older operating systems not always support automatic recognition of USB devices. If you have attached
your USB receiver and exactly this error occurs on your system, you have the following alternatives to
solve the problem:
• Perform an update of your operating system and return to Step 2.2
• In some cases the installation CD of your operating system is necessary according to the instructions on
your screen. In this circumstance please follow these instructions*.
• Check whether your BIOS system supports USB keyboards*. Some main board manufacturers offer
BIOS up-dates for download over the Internet
• Ensure in your system settings, that the used USB connection was not deactivated in your operating
system*.
• Should your system-updates keep out of success, it is recommendable to test the keyboard with another
PC with the same operating system to rule out a hardware damage of the USB receiver.
* Refer to the documentation of your PC for details.
Windows 98SE / ME / 2000 / XP / Vista / 7
- 10 -
Operation Manual KSK-3200 RF
E&OE

Advertisement

loading