Turning The Player On And Off - Sony Walkman NWZ-E455 User Manual

WALKMAN User Guide
Getting Started
How to Use the Software
Music
"SensMe™ Channels"
Videos/Podcasts/Photos
FM Radio
Making/Playing Voice
Recordings
Timer
Settings
Troubleshooting
Important Information
Specifications
Contents list
Top page > Getting Started > Power/Charging > Turning the player on and off

Turning the player on and off

To turn on the player
To turn off the player
OPTION/PWR OFF button
HOLD switch
If appears on the top of the screen, slide the HOLD switch in the opposite direction of
the arrow on the right side of the player to cancel the HOLD function.
To turn on the player
Press any button to turn the player on.
To turn off the player
Press and hold the OPTION/PWR OFF button [Details]. [POWER OFF] appears, the player
enters standby mode, and the screen turns off.
Hint
Set the date and time on the player before using it [Details].
During pause, if there is no operation for about 10 minutes, the player automatically enters
standby mode, and the screen turns off. In standby mode, press any button to turn on the
screen again.
While the player is in standby mode, if there is no operation for about a day, the player
completely turns off automatically.
Note
You cannot operate the player when it is connected to a computer. Disconnect the USB
cable before operating the player.
After connecting to a computer with the USB cable, the resume information of the last
played song, video, photo, etc., is cleared. Reselect the desired content from the list screen.
The player consumes battery power very slightly even when it is in standby mode.
Therefore, the player might unexpectedly turn off completely, depending on the power
remaining in the battery.
Copyright 2010 Sony Corporation
29
Print
Back to top