HP f1905 User Manual page 40

Setting Up the Monitor
4. Apply power to the monitor, the computer and other attached
devices. For the f monitor, turn the satellite speakers on and
adjust volume by turning the Control knob 9 on the right
speaker.
5. The Monitor Status displays a message:
❏ VGA Input: Active or No Input Signal
❏ DVI Input: Active or No Input Signal (select f monitor
❏ Mode: Settings
6. Adjust the monitor as needed for your comfort. Tilt the monitor
for proper viewing. Do not tilt the monitor beyond its easily
adjustable position. Refer to "Installing the Monitor" previously
in this chapter.
7. Configure the monitor as described in the next chapter,
"Operating the Monitor."
3–20
models only)
User's Guide