HP f1905 User Manual page 26

Setting Up the Monitor
5. Save the removed items (screws, hinge cover, pedestal, and
base) for future use.
6. Mount the vs monitor to a swing arm or other mounting fixture.
The four threaded mounting holes on the back of the panel,
located around the HP logo, are compliant with the VESA
standard for mounting flat-panel monitors. The vs15 Monitor
uses the 75 mm spacing standard, while the other vs Monitors
use the 100 mm spacing standard.
Use the four holes to attach a swing arm or other mounting
fixture. Follow the instructions included with the mounting
fixture to ensure that the monitor is safely attached.
To reinstall the desktop pedestal and base for the vs monitor:
1. Remove the mounting fixture.
2. Reverse the preceding instructions to slide the pedestal onto
the panel, insert the three screws, and then place the hinge
cover onto the hinge. Reinstall the base.
3–6 User's Guide