HP D5065 User Manual page 14

NOTE
HP 18.1" LCD Color Monitor User's Guide
Configuring Your Monitor
Selecting Input Priority
When your monitor is connected to two computers, you will need to give
priority to one computer. This computer is selected every time you switch on
your monitor and when using auto selection (see "Auto Selection" on page
11). To choose which computer has priority:
1 : 2
1 Select from the main menu, then press
sub menu.
2 Select INPUT 1 or INPUT 2 using the adjustment control, then press
save your selection and return to the OSD main menu.
The displayed image will disappear for a few seconds. The message INPUT
PRIORITY appears while the monitor makes your selection.
Input 1 and Input 2 correspond to connectors 1 and 2 on the rear of the monitor.
Obtaining Information
To obtain information about your monitor, select one of the following main
menu items:
Menu Item
SERIAL NUMBER
BACKLIGHT TIME
MODE INFO
1. Contains a record of any adjustments that the user makes in the main menu system.
2. Standard configurations pre-loaded at the factory.
12 English
Select to...
Display the serial number of your monitor
Display the estimated life span of the monitor's backlight
Display the video mode currently in use
Display the preset modes and user modes available
to enter the INPUT PRIORITY
1
2
to