Add A Cell Phone - VTech DS6673-2 User Manual

Bluetooth dect 6.0
Hide thumbs Also See for DS6673-2:
Table of Contents

Advertisement

Bluetooth

Add a cell phone

Before you begin, make sure that you have cellular coverage and your Bluetooth
enabled cell phone is not connected to any other Bluetooth devices. Refer to the
user's manual of your cell phone to learn how to search for or add new
Bluetooth devices.
You can pair and connect up to two cell phones to the telephone base. All paired
cell phones are shown on the cell device list. Both Bluetooth cell phones can be on
a call at a time.
Once you have paired and connected a device with the telephone base, you do not
need to repeat the procedure again unless you have replaced the paired cell phone
with a new one.
To pair and connect a cell phone:
1.
Press and hold
base for about four seconds. You hear a tone and the
CELL 1/ CELL 2 light blinks.
If there is already a cell phone in the slot, the existing
cell phone will be erased from the cell device list.
2.
Turn on the Bluetooth feature of your cell phone. Once
your cell phone finds your VTech phone (VTech DS6673),
press the appropriate key on your cell phone to continue the
pairing process.
Your cell phone may prompt you to enter the PIN of the telephone base. The
default PIN of the telephone base is 0000.
All cell phones that are connected to the telephone base are disconnected
temporarily until the pairing process is completed.
3.
When the cell phone is successfully paired and connected to the
telephone base, you hear a tone. The corresponding status icon
(
/
) displays on the handset and the corresponding device
1
2
light ( CELL 1/ CELL 2) on the telephone base turns on.
If you have trouble pairing your cell phone, it may not be compatible with your
DS6673. Check the Bluetooth compatibility list at www.vtechcanada.com.
The pairing process may take up to one minute. If the pairing process fails,
try again.
The steps for the pairing process may vary for different cell phones. If this
happens, follow the prompts on your cell phone and your DS6673 to complete the
pairing process.
CELL 1/ CELL 2 on the telephone
23
HANDSET
X
1
2
ANS ON
10:01
01/02
AM

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ds6673-3Ds6673-6cDs6673-6

Table of Contents