Displaying And Setting The Fastboot Mode - HP 744 Hardware User Manual

CAUTION:

Displaying and Setting the Fastboot Mode

When fastboot is enabled (set to on), your workstation does a quick check
of the memory and skips I/O interface testing during its power-on self tests.
This enables your workstation to complete its boot process more quickly.
The default factory setting is for fastboot to be disabled (off).
The fastboot mode allows your workstation to boot quickly by performing a
less extensive check of the system's memory.
When fastboot is disabled (set to off), more extensive memory testing and
I/O interface testing is performed during the selftests, causing the boot pro-
cess to take longer.
If you are experiencing difficulty in booting your workstation, set fastboot
to off and reboot the system. The more extensive testing may reveal the error
condition.
To display the status of fastboot, type the following at the prompt:
Configuration Menu: Enter command > fastboot
To disable fastboot, type the following at the prompt:
Configuration Menu: Enter command > fastboot off
To enable fastboot, type the following at the prompt:
Configuration Menu: Enter command > fastboot on
If a graphics adapter is installed in the system, it must be selected as the
console device. If additional graphics adapters are installed, Fastboot mode
cannot be used.
The Boot Console Interface
Displaying and Setting the Fastboot Mode
A-29