Nikon COOLPIX P340 Quick Start Manual page 256

Hide thumbs Also See for COOLPIX P340:
Table of Contents

Advertisement

Display
All images are hidden.
This image cannot be
deleted.
Raise the flash.
No access.
Could not connect.
Wi-Fi connection
terminated.
Lens error
Communications
error
System error
E84
Cause/Solution
• There are no images available for a slide show,
etc.
• There are no images that can be displayed on
the image selection screen for deletion.
The image is protected.
Disable protection.
• When the scene mode is Scene auto
selector, you can take an image even if the
flash is lowered but the flash will not fire.
• When the scene mode is Night portrait or
Backlighting with HDR set to Off, you must
raise the flash to take an image.
The camera could not receive the
communication signal from the smart device.
Select Connect to smart device in the Wi-Fi
options menu, and wirelessly connect the
camera and smart device again.
The camera failed to establish the connection
while receiving the communication signals from
the smart device. Select a different channel for
Channel in Options in the Wi-Fi options menu
and establish the wireless connection again.
A cable was connected to the camera while the
camera and smart device were wirelessly
connected, the battery level became low, or the
connection was aborted due to poor
connectivity. Check the status of the camera and
establish the wireless connection again.
A lens error occurred.
Turn the camera off and then on again. If the
error persists, contact your retailer or Nikon-
authorized service representative.
An error occurred while communicating with
the printer.
Turn the camera off and reconnect the USB
cable.
An error occurred in the camera's internal
circuitry.
Turn the camera off, remove and reinsert the
battery, and turn the camera on. If the error
persists, contact your retailer or Nikon-
authorized service representative.
A
E55
37
39, 41
95,
E63
95,
E63
95,
E63
22
E16
22

Advertisement

Table of Contents
loading

Table of Contents