Husqvarna RZ46i Operator's Manual page 24

Ride-on mower
Hide thumbs Also See for RZ46i:
Table of Contents

Advertisement

MAINTENANCE
Check/adjust throttle cable
Check the condition of belts, belt pulleys
Change the engine oil
1)
Replace the engine oil filter
Clean/replace the spark plugs
Replace the fuel filter
Replace paper air filter
2)
Check the caster wheels (every 200 hours)
Replace the air cleaner's foam pre-filter
Check/adjust the mower deck
Check the engine valve clearance
Perform the 300-hour service
1)
First change after 8-10 hours. When operating with a heavy load
or at high ambient temperatures, replace every 50 hours.
2)
In dusty conditions, cleaning and replacement are required more
often.
3)
Performed by authorized service workshop.
= Described in this manual
= Not described in this manual
= Refer to the engine manufacturer's manual
MAINTENANCE
2)
3)
3)
At least
Daily
once
each
Before
After
year
WARNING! Before performing any service or
adjustment checklist
Engage the park brake.
Place the Blade-switch in the disengaged position.
Turn the ignition switch to OFF position and remove
the key.
Make sure the blades and all moving parts have
completely stopped.
WARNING! Escaping hydraulic oil under pressure
can have sufficient force to penetrate the skin, causing
serious injury. If injured by escaping fluid, see a doctor at
once. Serious infection or reaction can develop if proper
medical treatment is not administered immediately.
24
Maintenance interval
in hours
25
50
100
300

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

967277604

Table of Contents