Controls Features - GE Profile Performance WPSE7003 Owner's Manual

About controls features.
S
TART
PAUSE
S
TOP
CANCEL
E T R
ST. IME EMAINING
8
START/PAUSE
After you have selected a new cycle, press once to start the cycle.
Press twice to select the last cycle used and start the washer.
If the washer is running, press once to interrupt the cycle; press again to continue
the cycle.
STOP/CANCEL
This pad should not be used to interrupt or pause a cycle.
Pressing this pad will cancel the current settings and the settings will be lost.
Estimated Time Remaining
Displays the approximate time remaining until the end of the cycle.
If the estimated time remaining is more than 60 minutes, "1H" will flash in the
display, followed by the additional remaining minutes. When the time remaining is
less than 60 minutes, the timer will count down.
Cycle time is affected by how long it takes the washer to fill. This depends on the
water pressure in your home. The "smart" timer "learns" the amount of time it
takes to fill your washer and adjusts the total time accordingly.
NOTE: If PRESOAK is selected and a follow up wash cycle is not chosen, two dashes
will come up in the display.
Spot Spray
When you open the washer lid and press the SPOT SPRAY button, you will see a short stream
of cold water.
Open the washer lid.
1
Press the SPOT SPRAY button. (You will see a short stream of water.)
2
Dampen your soiled garment with the SPOT SPRAY option and rub your favorite
3
pretreatment product into soiled area.
NOTE: The SPOT SPRAY option will not work if
the washer lid is down
the washer tub is filling
the water has already reached the level you selected.