Table of Contents
Advertisement
SERVICE HINTS
1. If upholstery nozzle does not spray or sprays unevenly:
A. Remove small nut from end of spray body. Remove brass
tip and washer from recess in spray body. With tweezers
or pin, remove filter inside. (Figure 1) Rinse filter with
clean water.
B. Inspect brass spray tip. If clogged, remove obstruction
with pin or needle. (Figure 2).
C. Reassemble parts by reversing above procedure.
2. If spray connections leak:
A. Disassemble nut at leaking connection.
B. Check washer. Be sure it is properly seated.
C. Reassemble nut and tighten securely.
REPLACEMENT PARTS LIST
KEY
1
2
3
4
5
6
7
PART NUMBER
643737-933
643735-002
643736-001
643799-000
643738-001
643737-952
643446-000
DESCRIPTION
Upholstery Nozzle
Nut - Spray Head
Spray Head
Washer - Small
Filter
Conn. & Valve Seat
Washer - Large
HOW TO ORDER PARTS
All parts listed herein may be ordered from any Sears, Roebuck and Company or Simpsons-Sears
Limited retail or catalog store.
WHEN ORDERING REPAIR PARTS, ALWAYS GIVE THE FOLLOWING INFORMATION:
1. Part Number
2. Part Description
3. Model Number 2081451
4. Name of Item — Upholstery Nozzle
If the parts you need are not stocked locally, your order will be electronically transmitted to a Sears
Repair Parts Distribution Center for expedited handling.
FULL ONE YEAR WARRANTY
When used for private household purposes, if within one year from first day of use in your home, this
Cleaner fails due to defect in material or workmanship, RETURN IT TO THE NEAREST SEARS
STORE OR SERVICE CENTER IN THE UNITED STATES, and Sears will repair it, free of charge.
This warranty gives you specific legal rights, and you may also have other rights which vary from
state to state.
^
SEARS, ROEBUCK AND CO., Sears Tower, BSC 41-3, Chicago, IL 60684
Advertisement
Table of Contents
