Advertisement
Connection Guide and Specifications
1
2A. Connecting Directly to TV
2
Connect a BNC to RCA
adapter and connect to video
input on your TV or VCR
INPUT
•
Try to aim the camera at an area which is evenly lit. Objects or people in shadows near brightly lit objects are
very hard to see. It's better to have the camera in the shade looking into the light than vice-versa.
•
When running your cable, try to avoid bending it at sharp angles.
•
Don't put your cable near live electrical wiring. AC electricity generates radio "noise" which can
interfere with the signal from your camera.
Technical Specifications
Video
Image Sensor
1/3" Sony 'Effio' CCD
Video Quality
700 TV Lines
Effective Pixels
NTSC:
PAL:
Min. Illumination
0 Lux (IR on)
White Balance
Automatic
Electronic Shutter
NTSC:
PAL:
Gain Control
Automatic
Backlight Comp.
Yes
Wide Dynamic Range Yes
Lens
3.6mm
Viewing Angle
Avg: 75° (H: 80°, V: 70°)
The green plug is used to connect the OSD (on-screen display)
controller. This is an advanced feature, and recommended only
for experienced users. To access a comprehensive guide for the
advanced features of this camera, log onto our website at:
Connect the camera's DC
and BNC socket cable to the
extension cable's DC and BNC plugs
Tips & Tricks
976 x 494
976 x 582
1/60 ~ 1/100 000
1/50 ~ 1/100 000
www.swann.com/osdpro
3
Connect the extension cables
DC socket to the DC plug on
the power adapter
2B. Connecting to Your Existing DVR
2
Connect the BNC extension
cable to an open channel on
the back of the DVR
Night Vision
Range
Up to 30m (100ft)
IR Cut Filter
No
Number of IR LEDs
24
Infrared Wavelength 850nm
IR LED Life (Average) 10, 000 hours
General
Operating Power
DC 12V @ 300mA
Operating Temp.
-20°C ~ 45°C (-4°F ~ 113°F)
Casing
Aluminium
Dimensions
165mm x 115mm x 67mm
(6.5" x 4.5" x 3.15")
Weight
465g / 17.5oz (approx)
4
Plug in the camera
power adapter into
a wall socket
3
Advertisement
