Advertisement
Inform WLAN AP-600RP-USB Configuration schemes Issue October 16
Page 3 of 6
AP-600RP-USB with ADSL Router advanced
4.
( 1 ) ADSL Router
WAN:
PPPoE over ADSL
LAN:
static IP: 192.168.1.1
DHCP
on: 192.168.1.10 - 90
GW: 192.168.1.1
DNS: auto
Connecting the devices to the AP-600RP-USB:
Installation Note
Both the AccessPoint as well as the ADSL Router have routing capabilities. This case describes using both devices in
the router mode in order to have the full feature set of the AccessPoint active, like the Firewall, NAT or the packet
forwarding service.
Important: The IP segment of the ADSL Router has to be different from the one of the AccessPoint, otherwise the APs
Router will not work properly. Due to production process, the third IP segment of the AccessPoint must be different to
192.168.2.X, as the default WAN settings for "static IP address" is set to 192.168.2.1 .
ADSL Router:
- DHCP Server (on or off)
- managing the PPPoE session
2
1
( 2 ) AP-600RP-USB
WAN:
dynamic IP address
LAN:
static IP: 192.168.4.254
DHCP
on: 192.168.4.10 - 90
GW: 192.168.4.254
DNS: auto
Routing: on (cable from Router
connected to the WAN
interface)
SSID:
CONNECT2AIR
1
4
3
4
AP-600RP-USB:
- DHCP Server
- handling the wireless LAN (WLAN) access
- NAT Routing, Firewall are active
th
2003
3
( 3 ) Notebook
TCP/IP:
get IP and DNS
address
automatically
SSID:
CONNECT2AIR
Data Rate: auto
Advertisement
