Fujitsu Siemens Computers CONNECT2AIR WLAN AP-600RP-USB Configuration Manual

Inform October 2003
CONNECT2AIR™ WLAN
AP-600RP-USB
Configuration schemes
Category: CONNECT2AIR WLAN
www.fujitsu-siemens.com
Content
1.

Introduction

2.

WLAN Security

3. AP-600RP-USB with ADSL Router
4. AP-600RP-USB with ADSL Router advanced
5. AP-600RP-USB with ADSL Modem
6. AP-600RP-USB with CABLE Modem
7. Two AP-600RP-USB in repetition mode (WDS)
Introduction
1.
The AP-600RP-USB offers a wide range of configuration possibilities due to the extended feature set.
This paper helps you to manage more complex configuration schemes and helps you in configuring
your AccessPoint as well as other devices in the network, like ADSL Routers.
Novices and Professionals will find appropriate information, depending on their knowledge. You will
find an overview on how the configuration should like. Compare it with your settings and adopt it. No
step-by-step installation is provided with this paper, so please consult the manual provided with the
product or download it from
USB
Important: Before starting with configuring your device, please make sure that you download the
latest Firmware from the support homepage: from
Accessories
WLAN Security
2.
To protect your intellectual property, secure your wireless connection! This AccessPoint is equipped
with a sophisticated security algorithm to protect against intruders entering your system or listening to
what you are transferring over your network.
It is highly recommended to have at least Wired Equivalent Privacy (WEP) with 128 bit enabled.
Refer to the manual in order to get information about how to secure your WLAN or visit
http://www.fujitsu-siemens.com/mobility
http://www.driver-cd.com
Wireless LAN AP-600RP-USB
.
Content: Config. schemes
Accessories Wireless LAN
http://www.driver-cd.com
AP-600RP-