Network Settings; Available Networks And Checking Current Network Status; Connecting To Cable Network - ZaapTV HD509N User Manual

6 Network Settings

6.1 Available Networks and Checking Current Network Status

Check the available guaranteed bandwidth with your ISP.
Recommended bandwidth: To ensure smooth playing of Internet video resources, the
bandwidth should be at least 2Mbps.
Router: For easy and quick connection, a wireless router is recommended. A common
wireless router can meet the bandwidth requirement for ITPV. The HD509N Set-Top-Box
integrates a Wi-Fi module, which can connect to wireless router directly. When you intend
to stream high quality movies from internal network, an Ethernet cable connection is
recommended.

6.2 Connecting to Cable Network

6.2.1 Connecting to the router
• Connect the network cable to the LAN port of this unit, and connect the other end to
the LAN port of the router.
• Turn on the unit, select Settings – Cable Network, check the option "Cable Network"
or press OK on the remote control to set this option to "ON".
• After turning on the cable network, check if the "Cable Network" is selected; if DHCP
(Dynamic Host Configuration Protocol) is enabled in the router, this unit will obtain IP
address automatically.
• After connecting to the network, the "Cable Network" option shows: Cable network is
turned on; IP address, gateway, subnet mask and other information are listed below.
HD509N-User's Guide 10