Cleaning The Seat Belts - Honda 2005 Civic Owner's Manual

Main Menu
Table of Contents
Lights, Cleaning the Seat Belts
Replacing a High-mount Brake
Light Bulb
BULB
SOCKET
EXcept U.S. Special Edition models and
Canadian REVERB and Si models
1. Open the trunk and remove the
socket from the light assembly by
turning it one-quarter turn counter-
clockwise.
2. Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
174
Reinstall the socket. Turn it
3.
clockwise until it locks. Make sure
the new bulb is working.

Cleaning the Seat Belts

If your seat belts get dirty, use a soft
brush with a mixture of mild soap
and warm water to clean them. Do
not use bleach, dye, or cleaning
solvents. Let the belts air-dry before
you use the vehicle.
LOOP