Table of Contents
Advertisement
Main Menu
Table of Contents
Playing the Radio
To Play the Radio
The ignition switch must be in the
ACCESSORY (I) or ON (II) position.
Turn the system on by pushing the
VOL/PWR knob or the AM/FM
button (AM or FM button on
Canadian model). Adjust the volume
by turning the same knob.
The band and frequency that the
radio was last tuned to is displayed.
To change bands, press the AM/FM
button (AM or FM button on
Canadian model). On the FM band,
ST will be displayed if the station is
broadcasting in stereo. Stereo
reproduction on AM is not available.
118
Comfort and Convenience Features
To Select a Station
You can use any of five methods to
find radio stations on the selected
band:
TUNE, SEEK, SCAN,
preset buttons, and
AUTO SELECT
Use the TUNE knob to
TUNE
tune the radio to a desired frequency.
Turn the knob right to tune to a
higher frequency, or left to tune to a
lower frequency.
The SEEK function
SEEK
searches up and down from the
current frequency to find a station
with a strong signal. To activate it,
press the
or
SEEK button, then
release it.
The SCAN function
SCAN
samples all stations with strong
signals on the selected band. To
the
activate it, press the SCAN button, or
.
touch the SCAN icon (models with
navigation system), then release it.
You will see SCAN in the display.
The system will scan for a station
with a strong signal. When it finds
one, it will stop and play that station
for about 5 seconds.
If you do nothing, the system will
scan for the next strong station and
play it for 5 seconds. When it plays a
station you want to listen to, press
the SCAN button again.
Advertisement
Table of Contents
