Bottom View; Side View - Dell 1907FPV User Manual

About Your Monitor: Dell™ 1907FPV Flat Panel Monitor User's Guide
1 VESA mounting holes (100mm) (Behind
attached base plate)
2 Regulatory rating label
3 Security lock slot
4 Dell Soundbar mounting brackets
5 Barcode serial number label
6 Stand removal button
7 Cable holder
8 Lock down/release button

Bottom View

1 Power Insert the power cable.
connector
2 Dell Soundbar Connect the power cord for the Soundbar (optional).
power
connector
3 DVI connector Connect your computer DVI cable.
4 VGA Connect your computer VGA cable.
connector
5 USB upstream Connect the USB cable that came with your monitor to the monitor and the computer.
connector Once this cable is connected you can use the USB connectors on the side and bottom of the
monitor.
6 USB Connect your USB devices.
connector
NOTE: You can use this connector only after you connect the USB cable to the computer and the USB upstream connector on the monitor.

Side View

file:///T|/htdocs/monitors/1907FPV/en/about.htm[8/7/2012 10:06:38 AM]
Use to mount the monitor.
List the regulatory approvals.
Use a security lock with the slot to help secure your monitor.
Attach the optional Dell Soundbar.
Refer to this label if you need to contact Dell for technical support.
Press to release the stand.
Help organize cables by placing them in the holder.
Push the monitor down, press the button to unlock the monitor, and then
lift the monitor to the desired height.