Table of Contents
Advertisement
26
Attach a Serial Console Cable to a PC or Terminal
13. Adjust the front of the rails (that you left loose in
the front of the rail aligns with the screw in the flange.
14. Screw the flange screws tightly into the rails, as shown in
Figure 3-8: Securing the Chassis to the Rails
15. Firmly tighten the front rail screws.
For the VFrame Evaluation Test Plan, continue to
the
"VFrame Evaluation Test
1.
Connect the cable from the Topspin serial console to your terminal or management workstation.
Use the straight-through M/F serial cable, which is provided in the Topspin package.
NOTE: For detailed information on how to connect the serial console cable, please see the
documentation included with the serial cable kit.
2.
Open a terminal emulation window using a program such as HyperTerminal for Windows. Set your
terminal parameters to the following:
•
Baud: 9600 bps
•
Data Bits: 8
•
Parity: None
step
step b
Plan".
10) so that the threaded hole in the center of
Figure
3-8.
of
"Hardware Installation Steps" on page 13
in
Advertisement
Table of Contents
