Please read the following safety information carefully
before installing the Switch:
WARNING: Installation and removal of the unit must be carried out by
qualified personnel only.
This guide is intended for use by network administrators who are
•
responsible for setting up and installing network equipment;
consequently it assumes a basic working knowledge of LANs (Local
Area Networks).
The unit must be connected to an earthed (grounded) outlet to
•
comply with international safety standards.
Do not connect the unit to an A.C. outlet (power supply) without an
•
earth (ground) connection.
The appliance coupler (the connector to the unit and not the wall plug)
•
must have a configuration for mating with an EN 60320/IEC 320
appliance inlet.
The socket outlet must be near to the unit and easily accessible. You
•
can only remove power from the unit by disconnecting the power
cord from the outlet.
This unit operates under SELV (Safety Extra Low Voltage) conditions
•
according to IEC 60950. The conditions are only maintained if the
equipment to which it is connected also operates under SELV
conditions.
vi